For UK food manufacturers

Inline GS1 QR verification for food manufacturers

Make sure every GS1 Digital Link QR code you print scans first time at the till.

  • Every QR code read and ISO graded at full line speed
  • GS1 Digital Link data checked against the job
  • Works with your existing printers
GS1 UK ApprovedGS1 UK approved solution

Book a line assessment

Tell us about your line. We'll reply within one working day.

We'll use your details to reply to your enquiry. Privacy and cookies

  • Tesco
  • M&S
  • GS1
  • Sainsbury's

The problem

Printing the code is only half the job

A grade isn't a guarantee

A code can pass a print grade and still fail to scan at a real till.

Spot checks miss bad runs

Checking a few packs an hour leaves whole batches unverified if a printhead drifts.

Sunrise 2027 is close

Retailers including Tesco are moving to GS1 QR codes. Lines need to be ready.

How it works

Verification built into your line

  • Every pack, inline

    A QR camera after the printer reads every code at full line speed.

  • ISO print grade

    Each code is graded against ISO/IEC 15415, A to F.

  • GS1 Digital Link check

    GTIN, batch and date are checked against the job.

  • Audit record

    Every result is stored with your normal traceability data.

The verification triangle

Three checks, one answer: does it go beep?

We correlate the inline grade with offline sampling and real till scans, so whatever your line prints behaves the same way at the checkout.

The till

The scan that matters. Does it go beep first time?

Inline camera

Our line camera grades 100% of packs in real time.

Offline sampling

Axicon sample checks confirm the inline grades are right.

Axicon offline verifier used for sample checks
Operator using the OAL Connected verification screen on a production line

Already in production

GS1 QR codes are already printed and graded on real UK food lines

  • Tesco trials under way on selected own-brand lines
  • OAL Connected certified by GS1 UK
  • Every code graded by camera, pack by pack

Works with your existing printers

  • Videojet
  • Markem-Imaje
  • Domino
  • Linx
  • Hitachi

Already an OAL customer?

We add a QR camera to your existing OAL system and collect all the QR verification data alongside your normal traceability information.

Common questions

Can I keep my existing printers?
Usually, yes. OAL Connected works with Videojet, Markem-Imaje, Domino, Linx and Hitachi. A line assessment confirms what your line can do.
Will it slow my line down?
No. The camera reads and grades each code as packs pass, at normal line speed.
Why verify inline rather than spot check?
Spot checks only cover the packs you pick up. Inline verification checks every pack, rejects failures and keeps a record.
What grade does Tesco require?
A minimum ISO/IEC 15415 grade of C unless an exception is agreed. Tesco's aspiration is inline grading where technically feasible, with offline checks acceptable in the short term.
Does this help with Tesco's pre-production sign-off?
Yes. Before launch, Tesco signs off each line on data, print and verification, including line-stop thresholds and corrective actions. Inline grading gives you the evidence for it.
What happens in a line assessment?
We look at your printers, packaging, line speed and where your product data lives, then tell you what's needed to print and verify GS1 QR codes.
How long does it take to get ready?
It depends on your line, data and printers. The assessment gives you a clear plan and timeline.

Find out what your line needs

A line assessment gives you a clear plan for printing and verifying GS1 QR codes.

Not ready yet? Take the two-minute readiness check

Book a line assessment